Product SKUs |
SKUs | |
Physical Stats |
Form Factor | |
Dimension | - 8" x 10" (20.32cm x 25.4cm)
|
Processor |
CPU | - Intel® Xeon® Processor D-2123IT
- Single Socket FCBGA-2518 supported, CPU TDP supports Up to 60W TDP
|
Core | - Up to 4 cores, 8 threads / 8MB Cache
|
System Memory |
Memory Capacity | - 4 DIMM slots
- Up to 512GB ECC LRDIMM, DDR4-2400MT/s; Up to 256GB ECC RDIMM, DDR4-2400MT/s
|
Memory Type | - 2666/2400/2133 MT/s ECC DDR4 LRDIMM, RDIMM (Operating speed up to 2400MHz)
|
DIMM Sizes | |
Memory Voltage | |
Error Detection | - Corrects single-bit errors
|
On-Board Devices |
Chipset | |
SATA | - SoC controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10
|
IPMI | |
Graphics | - 1 ASPEED AST2500 BMC port(s)
- Header Only
|
Network Controllers | - Quad LAN with 1GbE with Intel® I350-AM4
- Dual LAN with 10Gbase-T
- Quad LAN with Intel® Ethernet Controller I350-AM4
- Dual LAN with 10G SFP+ LAN via SoC, Total 13 LAN ports
- Single LAN with 1GbE with Intel® I210
- Single LAN with Realtek RTL8211E PHY (dedicated IPMI)
|
Input / Output |
SATA | |
LAN | - 1 RJ45 Dedicated IPMI LAN port
- 2 10G SFP+ LAN ports
- 2 RJ45 10GBase-T ports
- 9 RJ45 Gigabit Ethernet LAN ports
|
USB | - 4 USB 2.0 port(s) (4 via header)
- 2 USB 3.1 Gen1 port(s) (2 rear type A)
|
Video Output | |
Serial Port | - 2 COM Port(s) (1 header; 1 rear)
|
DOM | - 1 SuperDOM(Disk on Module) port with build power
|
TPM | |
Expansion Slots |
PCIe | - 1 PCIe 3.0 x32 Left Riser Slot
|
M.2 | - M.2 Interface: 1 SATA/PCIe 3.0 x4; 1 PCIe 3.0 x1; 1 SATA/PCIe 3.0 x2/USB 3.0
- Form Factor: 2280/22110, 2230, 2242/3042
- Key: M-Key, E-Key, B-Key
|
System BIOS |
BIOS Type | |
BIOS Features | - ACPI 6.1
- SMBIOS 3.1
- SMBIOS 2.8
- PCI FW 3.2
- UEFI 2.7
|
Management |
Software | - SuperDoctor® 5, NMI,SUM, KVM with dedicated LAN, Intel® Node Manager,IPMI2.0, Watchdog, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
|
System Management Software | - IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support, IPMICFG
|
Power Configurations | - ACPI Power Management, +12V DC Power Input, CPU thermal trip support for processor protection
|
PC Health Monitoring |
Voltage | - System temperature, System level control, Supports system management utility, Memory, HT, Chassis intrusion header, 6 -fan status, +5V standby, +5V, +3.3V, +12V, +1.5V, Memory Voltages
|
LED | - UID/Remote UID
- CPU / System Overheat LED
|
Temperature | - Thermal Control for 6 Fan Connectors
- Adaptive Thermal Monitor, PECI 3.0
|
FAN | - 6x 4-pin fan headers (up to 6 fans)
- Thermal control tachometer fan connectors, System level control, PWM fan speed control, Low noise fan speed control, Fan speed control, Dual Cooling Zone, 6 fans with tachometer status monitoring, Pulse Width Modulated (PWM) fan connectors, Overheat LED indication
|
Other Features | - WOL, UID, System level control, RoHS, Node Manager Support, M.2 NGFF connector, Dual Cooling Zones, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ATX Power connector, ACPI power management, 8-pin 12v DC power connector, 12V DC or ATX Power Source, SDDC
|
Operating Environment |
Operating Temperature Range | - 0°C - 60°C (32°F - 140°F)
|
Non-Operating Temperature Range | - -40°C - 70°C (-40°F - 158°F)
|
Operating Relative Humidity Range | - 8% - 90% (non-condensing)
|
Non Operating Relative Humidity Range | - 5% - 95% (non-condensing)
|