Product SKUs |
SYS-1019S-WR | - SuperServer 1019S-WR (
Black
)
|
Motherboard |
Installed Motherboard | |
Processor/Cache |
CPU | - Single Socket H4 (LGA 1151) supports:
- Intel® Xeon® processor E3-1200 v6/v5,Intel® 7th/6th Gen Core™ i3,Intel® Pentium®,Intel® Celeron® processors
- CPU TDP up to 80W
|
Note | - BIOS version 2.0 or above is required to support Intel® Xeon® Processor E3-1200 v6 series or 7th Generation Intel® Core™ Processors
|
System Memory |
Memory Capacity | - 4x 288-pin DDR4 DIMM slots
- Up to 64GB DDR4
ECC UDIMM
|
Memory Type | - 2400/2133/1866/1600MHz
ECC DDR4 SDRAM 72-bit,
288-pin
(UDIMM) gold-plated DIMMs
|
DIMM Sizes | |
Memory Voltage | |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
On-Board Devices |
Chipset | |
SATA | - SATA3 (6Gbps) via C236 controller
- RAID 0, 1, 5, 10 support
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers | - Dual Intel® I210-AT Gigabit Ethernet LAN ports
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
Video | |
Input / Output |
SATA | |
LAN | - 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 dedicated IPMI LAN port
|
USB | - 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A)
- 6 USB 2.0 ports (2 rear + 4 headers)
|
Video | |
Serial Port / Header | - 2 COM ports (1 rear, 1 header)
|
SuperDOM | - 2
SuperDOM
(Disk on Module) ports with built-in power
|
PC Health Monitoring |
Voltage | - Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
|
FAN | - Total of 6 fan headers supporting up to 6 fans
- 4 fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - System Information LED
- Suspend static indicator LED
- UID/Remote UID
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
- RoHS, Halogen Free
|
Chassis |
Form Factor | |
Model | |
Dimensions and Weight |
Height | |
Width | |
Depth | |
Package | - 23.8" (W) x 8" (H) x 27" (L)
|
Weight | - Gross Weight: 27 lbs (12.25 kg)
- Net Weight: 15.5 lbs (7.03 kg)
|
Available Colors | |
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Information LED
- Information LED (temp., status)
|
Expansion Slots |
PCI-Express | - Left riser slot: 1 PCI-E 3.0 x16 or 2 PCI-E 3.0 x8
- 1 PCI-E 3.0 x4 (in x8 slot)
|
M.2 | - 1x M.2 Interface: PCI-E 3.0 x4 and SATA
- Form Factor: 2260, 2280, 22110
- Key: M-Key
- Double Height Connector
|
Drive Bays |
Internal | |
System Cooling |
Fans | - 4x 40x56mm PWM Cooling Fans
- 2x Optional fans for AOC cooling
|
AC/DC240V Input Redundant Power Supplies |
- 400W 1U Redundant Power Supplies with PM Bus
|
Total Output Power | |
Dimension(W x H x L) | |
Input | - 100 - 240Vac / 6.0 - 3.0A / 50-60Hz
- 200 - 240Vdc / 3.4 - 3.2A (CCC Only)
|
+12V | |
+5V sb | |
Output Type | - Gold Finger Connector Mating with Molex 45984-4343
|
Certification | |
System BIOS |
BIOS Type | - 8MB SPI Flash EEPROM with AMI BIOS
|
Operating Environment / Compliance |
RoHS | |
Environmental Spec. | - Operating Temperature:10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:8% to 90% (non-condensing)
- Non-operating Relative Humidity:5% to 95% (non-condensing)
|