Product SKUs |
SYS-6019P-WT | - SuperServer 6019P-WT (
Black
)
|
Motherboard |
Installed Motherboard | |
Processor/Cache |
CPU | - Dual Socket P (LGA 3647)
- 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,Dual UPI up to 10.4GT/s
- Support CPU TDP 70-165W*
|
Cores | |
Note | - * Certain high frequency optimized CPUs within 165W TDP are not supported, such as Intel Gold 6144, 6146, 6244, 6246, 6250 and 6256.
|
Note | - ‡BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R).Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Safe Consulting Technical Support for additional information.
|
System Memory |
Memory Capacity | - 12 DIMM slots
- Up to 3TB 3DS ECC DDR4-2933MHz†RDIMM/LRDIMM
- Supports Intel® Optane™ DCPMM††
|
Memory Type | - 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
|
Note | - †2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro††Cascade Lake only. Contact your Supermicro sales rep for more info.
|
On-Board Devices |
Chipset | |
SATA | - SATA3 (6Gbps); RAID 0, 1, 5, 10
|
Network Controllers | - Dual LAN with Gigabit Ethernet from C621
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
Video | |
Input / Output |
SATA | |
LAN | - 2 RJ45 Gigabit Ethernet ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB | |
Video | |
DOM | - 2 Super
DOM
(Disk on Module) ports
|
System BIOS |
BIOS Type | |
Management |
Software | - Intel® Node Manager
- IPMI 2.0
- KVM with dedicated LAN
- SSM
,
SPM
,
SUM
- SuperDoctor® 5
- Watch Dog
|
Power Configurations | - ACPI / APM Power Management
|
PC Health Monitoring |
CPU | - Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
FAN | - Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
Chassis |
Form Factor | |
Model | |
Dimensions and Weight |
Width | |
Height | |
Depth | |
Gross Weight | |
Available Colors | |
Front Panel |
Buttons | - Power On/Off button
- UID button
|
LEDs | - Power status LED
- HDD activity LED
- Network activity LEDs
- Universal Information (UID) LED
|
Expansion Slots |
PCI-Express | - 2 PCI-E 3.0 x16 (FHHL) slots
- 1 PCI-E 3.0 x8 (LP) slot
- 1 PCI-E 3.0 x16 for Add-on-Module (AOM)
- 1 PCI-E 3.0 x4 NVMe M.2 slot
|
Drive Bays |
Hot-swap | - 4 Hot-swap 3.5" SATA3 drive bays
|
System Cooling |
Fans | - 4 Counter-rotating 4cm PWM fans, 2 fans for cooling AOC
|
Power Supply |
- 600W High-Efficiency Power Supply w/PM Bus 1.2, I2C, PFC, and Digital Switching
|
AC Input | |
DC Output | - +3.3V: 15A
- +5V: 18A
- +5V standby: 3A
- +12V: 49A
- -12V: 0.5A
|
Certification | |
Operating Environment |
RoHS | |
Environmental Spec. | - Operating Temperature:10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:8% to 90% (non-condensing)
- Non-operating Relative Humidity:5% to 95% (non-condensing)
|
General |
Backplane | |