Product SKUs |
MBD-M11SDV-4CT-LN4F | |
Physical Stats |
Form Factor | |
Dimensions | - 6.7" x 6.7" (17cm x 17cm)
|
Processor/Cache |
CPU | - Single AMD EPYC™ 3101 SoC Processor
|
Cores | |
System Memory |
Memory Capacity | - 4 DIMM slots
- Supports up to 512GB Registered ECC DDR4 2666MHz SDRAM in 4 DIMMs
- 2-channel memory bus
|
Memory Type | - DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
|
DIMM Sizes | - 8GB, 16GB, 32GB, 64GB, 128GB
|
Memory Voltage | |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
On-Board Devices |
SATA | |
Network Controllers | - 4x 1GbE with Intel® I350-AM4
- 1 Realtek RTL8211E PHY (dedicated IPMI)
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2500 BMC
|
VGA | |
Input / Output |
SATA | |
LAN | - 4 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB | - 2 USB 3.0 ports
- 6 USB 2.0 ports
|
VGA | |
Others | - 1 COM port header
- 1 TPM 2.0 header
|
Expansion Slots |
PCI-Express | |
M.2 | - Interface: 1 PCI-E 3.0 x4
- Form factor: 2280
- Key: M-key
|
Chassis ( Optimized for M11SDV-4CT-LN4F ) |
Mini-ITX | |
1U | - SC504-203B
- SC505-203B
- SCE300
- SCE301
|
System BIOS |
BIOS Type | |
Management |
Software | - Super
Doctor 5
- Watch Dog
- NMI
- SUM
- IPMI 2.0
, KVM with dedicated LAN
|
Power Configurations | - ACPI Power Management
- Power-on mode control for AC power loss recovery
|
PC Health Monitoring |
CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +12V
- CPU switching voltage regulator
- Supports system management utility
- VBAT
|
FAN | - Up to 3 fan status tachometer monitoring
- Up to 3 4-pin fan headers
- Dual Cooling Zone
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 6x Fan connectors
- I²C Temperature Sensing Logic
|
LED | - CPU / System Overheat LED
|
Other Features | |
Operating Environment / Compliance |
Environmental Specifications | - Operating Temperature:0°C to 60°C (32°F to 140°F)
- Non-operating Temperature:-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:8% to 90% (non-condensing)
- Non-operating Relative Humidity:5% to 95% (non-condensing)
|