Product SKUs- Discontinued SKU (EOL). Please contact sales-rep for alternative options. |
SYS-1028R-MCTR | - SuperServer 1028R-MCTR (
Black
)
|
Motherboard |
Installed Motherboard | |
Processor/Cache |
CPU | - Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 145W TDP)*
- Dual Socket R3 (LGA 2011)
|
Cores / Cache | - Up to
22 Cores†/ Up to
55MB†Cache
|
System Bus | |
Note | - †BIOS version 2.0 or above is required
|
Note | - * Please contact Safe Consulting Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
System Memory |
Memory Capacity | - 8x 288-pin DDR4 DIMM slots
- Up to 1TB†ECC 3DS LRDIMM, 512GB ECC RDIMM
|
Memory Type | - 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes | - RDIMM:
64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
Memory Voltage | |
Error Detection | - Corrects single-bit errors
|
On-Board Devices |
Chipset | |
SAS | - SAS3 (12Gbps) via Broadcom 3108
- RAID 0, 1, 5, 6, 10, 50, 60 support
- 2GB DDR3 Cache
|
SATA | - SATA3 (6Gbps); RAID 0, 1, 5, 10
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers | - Intel® X540 10GBase-T controller
- Intel® i210 Gigabit Ethernet controller
- Supports 10GBASE-T, 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
Video | |
Input / Output |
SAS | |
SATA | - 6x SATA3 (6Gbps) ports
- I-SATA 4 & I-SATA 5 support SATA DOM
|
LAN | - 2x RJ45 10GBase-T LAN ports
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | - 4x USB 3.0 ports (2 rear, 2 headers)
- 3x USB 2.0 ports (2 headers, 1 Type A)
|
Video | |
Serial Port / Header | |
DOM | - 2x Super
DOM
(Disk on Module) ports
|
Management |
Software | - IPMI 2.0
- Intel® Node Manager 3.0
- SuperDoctor® 5
- SSM
- SPM
- SUM
- Watch Dog
|
Power Configurations | - ACPI Power Management
- Power-on mode for AC power recovery
|
Chassis |
Form Factor | |
Model | |
Dimensions and Weight |
Width | |
Height | |
Depth | |
Package | - 24" (W) x 8.3" (H) x 30" (L)
|
Gross Weight | |
Available Colors | |
Front Panel |
Buttons | - Power On/Off button
- System Reset button
- UID button
|
LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
Expansion Slots |
PCI-Express | - 1x PCI-E 3.0 x8 (FHHL) slot
|
Drive Bays |
Hot-swap | - 8x 2.5" Hot-swap SAS3/SATA3 Drive Bays
|
Peripheral Drives |
DVD-ROM | - 1x Slim DVD-ROM drive (optional)
|
System Cooling |
Fans | - 4x 4cm fans with optimal fan speed control
|
Power Supply with Power Distributor |
- 600W Redundant Power Supplies with PM Bus
|
Total Output Power | |
Dimension(W x H x L) | |
Input | - 100-240V, 50-60Hz, 7.5-3.5A
|
+12V | |
+5Vsb | |
Output Type | - Gold Finger Connector Mating with Molex 45984-4343
|
Certification | |
System BIOS |
BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features | - Plug and Play (PnP)
- PCI 2.3
- ACPI 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
Operating Environment / Compliance |
RoHS | |
Environmental Spec. | - Operating Temperature:10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:8% to 90% (non-condensing)
- Non-operating Relative Humidity:5% to 95% (non-condensing)
|
General |
Backplane | - - SAS3/SATA3 Backplane- Optional 2x 2.5" NVMe drives
|