Product SKUs- Discontinued SKU (EOL). Please contact sales-rep for alternative options. |
SYS-5018R-MR | - SuperServer 5018R-MR (
Black
)
|
Motherboard |
Installed Motherboard | |
Processor |
CPU | - Intel® Xeon® processor E5-2600
v4†/
v3, E5-1600
v4†/
v3 family
(up to 145W TDP **)
- Single Socket R3 (LGA 2011)
|
Core / Cache | - Up to
22 Cores†/ Up to
55MB†Cache
|
Note | - †BIOS version 2.0 or above is required
|
Note | - ** Motherboard supports this maximum TDP. Please verify your system can thermally support
|
System Memory |
Memory Capacity | - 8x 288-pin DDR4 DIMM slots
- Up to 1TB ECC 3DS LRDIMM
- Up to 512GB ECC LRDIMM
- Up to 256GB ECC RDIMM
|
Memory Type | - 2400†/
2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs
|
DIMM Sizes | - 3DS LRDIMM: 128GB
- LRDIMM: 64GB, 32GB
- RDIMM: 32GB, 16GB, 8GB, 4GB
|
Memory Voltage | |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
On-Board Devices |
Chipset | |
SATA | - SATA3 (6Gbps) via C612 controller
- RAID 0, 1, 5, 10 support
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers | - Intel® i350-AM2 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Video | |
Input / Output |
SATA | |
LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | - 2x USB 3.0 ports (2 rear)
- 4x USB 2.0 ports (2 rear + 2 header)
|
Video | |
Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
|
DOM | - 2x Super
DOM
(Disk on Module) ports
|
PC Health Monitoring |
Voltage | - Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
|
FAN | - Total of 6 fan headers supporting up to 6 fans
- 6 fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - System Information LED
- Suspend static indicator LED
- UID/Remote UID
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
- RoHS, Halogen Free
|
Chassis |
Form Factor | |
Model | |
Dimensions and Weight |
Height | |
Width | |
Depth | |
Package | - 8" (H) x 24" (W) x 28" (D)
|
Weight | - Gross Weight: 31.4 lbs (14.3 kg)
- Net Weight: 18.6 lbs (8.5 kg)
|
Available Colors | |
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Information LED
|
Expansion Slots |
PCI-Express | |
Drive Bays |
Hot-swap | - 4x 3.5" Hot-swap drive bays
|
Peripheral Drives |
Optional | - Optional slim optical device bay,optional FDD/USB bay
- 2x 2.5" Fixed drives internal
|
System Cooling |
Fans | - 4x 40x28mm 4-pin PWM Cooling Fans
|
AC/DC240V Input Redundant Power Supplies |
- 400W 1U Redundant Power Supplies with PM Bus
|
Total Output Power | |
Dimension(W x H x L) | |
Input | - 100 - 240Vac / 6.0 - 3.0A / 50-60Hz
- 200 - 240Vdc / 3.4 - 3.2A (CCC Only)
|
+12V | |
+5V sb | |
Output Type | - Gold Finger Connector Mating with Molex 45984-4343
|
Certification | |
System BIOS |
BIOS Type | - 8MB SPI Flash EEPROM with AMI BIOS
|
BIOS Features | - DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
Operating Environment / Compliance |
RoHS | |
Environmental Spec. | - Operating Temperature:10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:8% to 90% (non-condensing)
- Non-operating Relative Humidity:5% to 95% (non-condensing)
|
General |
Backplane | - SAS/SATA HDD Backplane(SAS support requires optional SAS controller)
|