Product SKUs |
SYS-E200-9AP | - SuperServer E200-9AP (
Black
)
|
Motherboard |
Installed Motherboard | |
Processor/Cache |
CPU | - Intel® Atom® Processor E3940, 4 Core, 64-bit, 14nm
- FCBGA 1296
- System-on-Chip
|
System Memory |
Memory Capacity | - 1x 204-pin DDR3 SO-DIMM socket
|
Memory Type | - 1866/1600/1333MHz Unbuffered non-ECC SO-DIMM DDR3, 204-pin gold-plated DIMMs
|
DIMM Sizes | |
Memory Voltage | |
On-Board Devices |
SATA | - SoC controller for 2 SATA3 (6Gbps)
|
Network Controllers | - Dual GbE LAN with Intel i210IT controller
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
Video | |
Input / Output |
SATA | |
LAN | - 2 RJ45 Gigabit Ethernet LAN ports
|
USB | - 2 USB 3.0 (rear)
- 2 USB 2.0 (rear)
|
COM Port | - 3 COM ports (1 rear, 2 headers)1 in RJ45, 1 in RS232, and 1 in RS485
|
DOM | - 1 SATA DOM (Disk on Module) power connector
|
Video | - 1 VGA, 1 DP (Display Port), 1 HDMI, 1 Intel HD Graphics
|
Chassis |
Form Factor | |
Model | |
Dimensions |
Width | - 7.68" (195mm) / 15" (381mm) - pkg.
|
Height | - 1.75" (44.5mm) / 10.87" (276mm) - pkg.
|
Depth | - 7.68" (195mm) / 5.59" (142mm) - pkg.
|
Weight | - Gross Weight: 7.5 lbs (3.4 kg)
- Net Weight: 7.5 lbs (3.4 kg)
|
Available Colors | |
Front Panel |
Buttons | |
LEDs | - Power LED (Hard drive activity LED)
|
Expansion Slots |
PCI-Express | - M.2 PCIe 2.0 x2, M Key 2242/2280
|
Drive Bays |
Internal | - 1x 2.5" internal drive tray
|
System Cooling |
Fans | - 1x 4cm high performance PWM fan; support up to 2 chassis fans
|
System BIOS |
BIOS Type | - 64Mb SPI Flash EEPROM with AMI UEFI BIOS
|
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- ACPI 5.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI
|
Management |
Software | |
Power Configurations | - ACPI Power Management
- ATX Power connector
- Control of power-on for recovery from AC power loss
- CPU thermal trip support for processor protection
|
Fan | - Fans with tachometer status monitoring
- Status monitor for speed control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Operating Environment / Compliance |
RoHS | |
Environmental Spec. | - Operating Temperature:10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:8% to 90% (non-condensing)
- Non-operating Relative Humidity:5% to 95% (non-condensing)
|
General |
Power Supply | |