Product SKUs |
SSG-5029P-E1CTR12L | - SuperStorage 5029P-E1CTR12L (
Black
)
|
Motherboard |
Installed Motherboard | |
Processor |
CPU | - Single Socket P (LGA 3647)
- 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡
- Support CPU TDP 70-205W*
|
Cores | |
Note | - *Certain high frequency optimized CPU are not supported, such as Intel Gold 6250 and 6256. Please contact Safe Consulting Technical Support for additional information.
|
Note | - ‡BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
|
System Memory |
Memory Capacity | - 8 DIMM slots
- Up to 2TB 3DS ECC DDR4-2933MHz†RDIMM/LRDIMM
- Supports Intel® Optane™ DCPMM††
|
Memory Type | - 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
|
Note | - †2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro††Cascade Lake only. Contact your Supermicro sales rep for more info.
|
On-Board Devices |
Chipset | |
SATA | - SATA3 (6Gbps) via C622 controller
- RAID 0, 1, 5, 10 support
|
SAS | - SAS3 (12Gbps) via Broadcom 3008
- SW RAID 0, 1, 10
|
Network Controllers | - Dual LAN with 10GBase-T with Intel® X722 + X557
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
Graphics | |
Input / Output |
SATA | |
LAN | - 2 RJ45 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB | - 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A)
- 8 USB 2.0 ports (2 rear + 6 headers)
|
VGA | |
Serial Port / Header | - 2 COM Ports (1 rear, 1 header)
|
System BIOS |
BIOS Type | |
Management |
Software | - Intel® Node Manager
- IPMI 2.0
- KVM with dedicated LAN
- NMI
- SPM
,
SUM
- SuperDoctor® 5
- Watch Dog
|
Power Configurations | |
PC Health Monitoring |
CPU | - Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
FAN | - Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
Chassis |
Form Factor | |
Model | |
Dimensions |
Width | |
Height | |
Depth | |
Package | - 11.5" (H) x 26.5" (W) x 34" (D)
|
Weight | - Gross Weight: 58 lbs (26.3 kg)
- Net Weight: 34 lbs (15.4 kg)
|
Available Colors | |
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power status LED
- Hard drive activity LED
- Network activity LEDs
- System Information LED
- Power fail LED
|
Expansion Slots |
PCI-Express | - 1 PCI-E 3.0 x16
- 1 PCI-E 3.0 x8
- 1 PCI-E 3.0 x8
- 1 PCI-E 2.0 x4 (in x8)
|
M.2 | - 1x M.2 Interface: PCI-E 3.0 x4 and SATA
- Form Factor: 2280
- Key: M-Key
- Double Height Connector
|
Drive Bays / Storage |
Hot-swap | - 12 Hot-swap 3.5" SAS/SATA drive bays with SES3
|
Optional | - 2 Hot-swap 2.5" NVMe/SATA drive bays (rear)
|
System Cooling |
Fans | - 3 High-performance 80mm PWM fans
|
Power Supply (76mm Width) |
- 800W Redundant Power Supplies with PM Bus
|
Total Output Power | - 800W: 100 – 240Vac
- 800W: 200 – 240Vdc
|
Dimension(W x H x L) | |
Input | - 800W: 100-240Vac / 50-60Hz
- 800W: 200-240Vdc
|
+12V | - Max: 66A / Min: 0A (100-240Vac)
- Max: 66A / Min: 0A (200-240Vdc)
|
+5Vsb | |
Output Type | |
Certification | |
Operating Environment |
RoHS | |
Environmental Spec. | - Operating Temperature:10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:8% to 90% (non-condensing)
- Non-operating Relative Humidity:5% to 95% (non-condensing)
|
General |
Backplane | - SAS3 Backplane: SAS3 12Gbps single expander backplane, w/ LSISAS3x28 expander, support 12x 3.5" drives, with 4x mini-SAS HD connectors, 2 for uplink and another 2 for downlink
|